Tuesday, December 24, 2019

Compare And Contrast Othello And Iago - 1849 Words

In modern society, everyone has a drive to become greater than what they are, and in some cases it may require the elimination of the obstacles which restrict one’s progression. William Shakespeare’s Othello is play which portrays these unfortunate aspects of society through the characters of Othello and Iago. In short, the play is about a man named Iago who is unsatisfied with his prestigious commanding general, Othello, and plots to ruin his life. Iago is deceitful character who Othello perceives as truly honest and trustworthy, but through the manipulation of others, Iago transforms the general into an irrational character fueled by false doubt. This eventually directs Othello into ultimately killing his wife, Desdemona,†¦show more content†¦Moreover, after killing Desdemona, Othello cries â€Å"[m]y wife! My wife! What wife? I have no wife. /O insupportable! O heavy hour! (v. ii. 97-98). This shows how Othello is gullible for listening to Iagoâ €™s false claims of his wife, as he went to the extent of killing her. In contrast, Iago is manipulative when he seizes the opportunity to enter Othello’s life because of his open-mindedness. This can be seen from a soliloquy by Iago, where he believes â€Å"[t]he Moor is of a free and open nature†¦/[a]nd will as tenderly be led by the nose/[a]s asses are† (i.iii.388-391). This portrays Iago as a strategic thinker as he evaluates his opponent’s weakness before making his move. Furthermore, the soliloquy demonstrates Iago’s is very sly and independent, as he hides his thoughts in his mind, making him a proficient manipulator. Above seeking the opportunity to manipulate, Iago’s vividly demonstrates his persuasiveness when he convinces Othello that Desdemona, at the least, is a strumpet. This false accusation is justified by Iago when he convinces Othello that â€Å"[Desdemona’s] honour is an essence that is not seen† (iv.i.16). In this instance, Iago uses Desdemona to cast a sense of disturbance and doubt into Othello’s mind which will eventually challenge the couple’s relationship. The act of troubling Othello’s conscience will guide Othello away from his focus on work, thus paving a pathway for Iago to achieve his end goal, the lieutenantShow MoreRelatedShakespeares Play Othello and Tim Blake Nelsons Film O 826 Words   |  3 Pagesunaffected. Through the texts by composers William Shakespeare and Tim Blake nelson and their texts Othello and the late 20th century contemporary film O, the key values of trust, honesty and loyalty are explored with contextual influences being reflected. The values are explored with the use of thematic development of the key issues jealousy and appearance vs reality and the use of dramatic devices in Othello and cinematic techniques in O. Shakespeares accurate representation explored these values inRead More Othellos Loss for Words Essay1590 Words   |  7 Pagesfighter with a sound mind. However when Iago pressures him about the possible relationship between his wife Desdemona and Cassio, Othello’s passion for his beloved wife breaks down his self-control. In the next few pages I will demonstrate how Othello’s speech during the beginning of the play helps to strengthen his character, and by his death, he’s but a stuttering empty shell of a man. In addition, we’ll compare the language of the moor with that of Iago and see how anti-heroic words shape theRead MoreOthello: Compare and Contrast The Two Wives1627 Words   |  7 Pages Bob Mudd Compare and contrast the two characters Desdemona and Emilia from the play Othello. Desdemona and Emilia Comparison and Contrast In the play Othello the Moor of Venice by William Shakespeare., there are two prominent women that grab and hold our attention. One is the wife of the play’s heroic character Othello; the other is engaged to an untrustworthy man named Iago. The women are part of, but yet serve as a small piece of what goes on in the play and which is how the conflict of theRead MoreCompare And Contrast O Movie And Othello788 Words   |  4 PagesFor me, I think â€Å"O† movie was a god modern-day translation of â€Å"Othello† by William Shakespeare. The themes and ideas of Shakespeare Williams were translated to the movie and that he will agree with the modernization. I’ m going to compare and contrast the characters, plot and setting from the book and movie to prove my point. The movie has matching character with the book like in the book is Othello but in the movie is Odin James, Iago is Hugo Goulding, Cassio is Michael Cassio, Desdemona is DesiRead MoreCompare and Contrast of Desdemona and Emilia1295 Words   |  6 PagesAs one of Shakespeares famous tragedies, â€Å"Othello†, is a play that not only shows the love and the humanistic ideal destroyed, but also shows the tragic fortune of women in the era of the patriarchal society. (Snow 384) This play includes several main themes of love tragedies delivered through some contrasting values and characters such as love and jealousy, trust and breach of trust etc. Desdemona, a representative of the perfect embodiment of a faithful loving wife, eventually killed by herRead MoreComparison Between Othello And Emilia1147 Words   |  5 Pages Perkins 1 Jonathan Perkins Professor Barbara Russell COM1102 1 August 2014 Compare and Contrast Desdemona and Emilia in â€Å"Othello† In the play Othello, by William Shakespeare, there are two significant ladylike assumes that draw in our consideration. One is the wife of the play s tragic saint Othello; the other is locked in to one of the best malevolent individuals ever Iago. They are an imperative piece of what goes ahead in the play and inevitably how the genuine issueRead MorePractice HSC essay1060 Words   |  5 Pagesï » ¿Shakespeare’s play ‘Othello’ and the contemporary appropriation of a film ‘O’ by Tim Blake Nelson are based on the societal values and morals of their time. Issues such as racism, the use of language and deception are timeless making them evident throughout both contexts, hence the engagements in both textual forms. Differing contexts convey concerns in different ways through the use of diverse techniques. For example ‘Othello’ is a play which uses props, stage positioning and lighting comparedRead MoreWilliam Shakespeare s Othello And Cymbeline1263 Words   |  6 Pagesand Othello When studying Shakespeare’s Othello and Cymbeline it is important to note the plays possess several similarities in plot and characterization, including accusations of adultery and deceitful, foiling characters. More specifically, I noticed strong likenesses shared by the characters Iago and Iachimo. I would even argue that the similarities between the names Iago and Iachimo are no coincidence, but a deliberate choice made by Shakespeare. Iachimo is molded very similarly to Iago; howeverRead MoreHuman Nature And Evil Nature1227 Words   |  5 Pagestransgression of human nature and revealed evil’s presence, goals, motives, and strategies. His cunning tactics cause Eve to disobey and betray God, resulting in both her and Adam’s banishment from Heaven. Satan’s transformation has not only elucidated the contrast between good and evil but also created an irreversible suffering for his victims. Humans are now vulnerable to the seven deadly sins, and will inevitably continue to suffer the consequences. His plan progresses through a variety of steps includingRead MoreOthello Tragic Flaw1643 Words   |  7 PagesKapoor Professor Shapiro English 220.03 20 October 2017 It Is Othello’s Own Faults In Shakespeare’s Othello, Othello is a highly acclaimed general and because of his many achievements he has transcended stereotypes projected upon Moors in Venetian society. Desdemona and the nature of her affair, although it is false, is considered to be the root cause of Othello’s downfall and violent demise. Othello feels anxious about the racist nature engrained in Venetian society and eventually projects this manner

Monday, December 16, 2019

Upward Bound Free Essays

UPWARD BOUND I would like to work with upward bound this summer because I feel like it will be a great chance for me to meet new people and to start new relationships. I read one of the essay of a student that work with upward bound and he says that working with upward bound was one of the best things he ever did, his essay tell how he was anti-social and had little friends and how he didn’t like to talk to anyone well that kind of sound like me and I believe upward bound would help me just as much as I help. I would like to work with upward bound this summer because if I go home it will be hard for me I would have to find a job which I’m doing now and I would have to find some where to stay. We will write a custom essay sample on Upward Bound or any similar topic only for you Order Now And when I go home for some reason I find myself in trouble a lot. But the good thing about Jarvis I now know how to talk to people I know how to interact with people so working with the kids that’s coming in shouldn’t be hard for me. I believe I’m a likable person I don’t like being in mess or with it, I play football and basketball so I know how to have fun and I’ll always have something to do. And this will also be a good chance for me to work and save up money for the 2013-2014 school years. I don’t mind the work I can do whatever asked of me. I never worked with the upward bound program but I would like to so I can have some experience with working this would be my first job at Jarvis Christian College and I will give all that I got to make sure that I do my best and to see it that all the workers do their best as well. I know how to listen and do what I have been told to do I don’t mind doing the job and know how to take orders from the leaders. In high school I was in JROTC so I know how lead and follow I can talk to the kids because I know how I want to be talked to but I also know how to get the point across without coming off rude. If I get the job I will do everything in my power not to let no one down I will work hard and the job that’s giving to me. With hopes of getting this job I’m giving my word that I do my best at the position I’m put at. Wanting to work knowing that this job can help me in more then one way I had to at least try to get it although I might not meet all the standers of getting the job I would really love working with the kids and I would really love working for the upward bound program. How to cite Upward Bound, Papers

Saturday, December 7, 2019

Northern Drilling Inc. free essay sample

Executive Summary Peter Bremner, the general manager of Northern Drilling Inc. has received a request for proposal from Mond Nickel to bid for an upcoming project that will be Northern’s largest contract to date. The project involves an intermediate job, as well as a deep drilling job, and will require that Northern prioritize this contract over other existing contracts in terms of manpower and equipment. Northern has to assess the technical feasibility of this project before bidding with a competitive price. Mond Nickel being one of the largest players in the mining industry, winning this project would be a large step towards Northern’s growth strategy. However, overestimating their ability, or alternatively, selling themselves short would be detrimental to their overall success. The problem in question can therefore be defined as: 1. Should Northern bid for this project? 2. If it bids for the project, should it go for both jobs? 3. At what price should Northern bid? 4. What are the possible outcomes of Northern winning this contract, in terms of existing contracts, future contracts, and competition? Possible Courses of Action: The alternative courses of action that Northern can take are summarized below: Bid for both projects (intermediate and deep) Don’t bid for either project Bid for one of the projects (intermediate or deep) The main criteria for evaluating the alternatives will be the technical feasibility, costs and return on investment involved, and implications in terms of Northern’s Growth strategy. ANALYSIS Based on the proposed criteria and available alternatives, I would recommend that Northern bid for the deep drilling job. The reasons for my choice are as below: 1. Required Investment and Returns  Northern has 12 drills, which are currently being utilized for other projects. In view of this, it would be necessary to invest in new drills and equipment. The total cost of these investments would be: †¢Intermediate Job: $ 3.6 million (4 drills + equipment required) †¢Deep Job: $ 3.6 million (4 drills + equipment required) †¢Both Jobs: $ 7.2 million (8 drills + equipment required) The investment required for both jobs would represent 58% of Northern’s current assets (valued at $ 12.5 million) – a heavy capital investment for a company that is still looking to break into a larger scale market. The deep drilling job, with investment costs equal to those of the intermediate job, would not only result in greater earnings for Northern, but also be a crucial step in the direction towards their growth strategy. With reference to the expected return on investment, and bearing in mind the company’s policy to maintain a 30% gross margin, the internalized rate of return of the deep job is a healthy 7%, as compared to the negative IRR of taking only the intermediate project (see Exhibit 1). It is assumed in this case that depreciation and tax rates are at 2% and 35% respectively. While the IRR of taking both jobs is at 6%, the additional cost of investment is too great to consider. 2. Technical feasibility: The technical feasibility of this project can be assessed at three levels: Expertise and experience Manpower Available resources and equipment The manpower requirement for taking both jobs is the cost Northern would bear in terms of time spent in training new personnel. As it takes up to 30 months of training for each driller, training 24 new members of staff could delay the project by a considerable amount of time, which could pose a risk, given the fact that the mining industry is cyclical in nature. In terms of experience and expertise, Northern seems to be well-placed amongst its competitors. With Northern’s existing reputation of being superior in terms of technical capabilities and its market share of approximately 3% (View Exhibit 2) in the five short years since its inception, it follows that Mond would naturally consider Northern to bid for this project. Though the deep  drilling job would be more complex than the usual jobs Northern is known for, if Northern wished to break into the larger league, it would have to test its capability by taking on this project. By focusing its efforts and resources on only the deep drilling project as opposed to both jobs, Northern could use its strengths to successfully execute the job. The management was opposed to capital investment unless really required, which would make it hard to justify the purchase of 8 new machines, an inevitable consequence of taking on both projects. However, the reduced capital investment and expected revenues from the Mond project could be presented to make a compelling case to bid for the deep job. It could be argued that capital investment would not be required if the Noranda contract were to be re-evaluated. However, in view of the fact that Noranda still has the capacity for three more mines, and that the useful life of one of its mines is soon going to be expende d, it is likely that Noranda will require Northern’s drills for a project in the near future. 3. Competitive Strategy: Northern’s successful execution of the deep drilling job would place it in a niche above its existing competitive position. Currently, it is struggling to retain its market position due to price competition from lower end drill operators. However, with this new drilling job, Northern will gain valuable experience and recognition that could place it a long way ahead of its competitors, and justify its marginally higher costs. Apart from this, the Mond contract demands intensive requirements in terms of manpower and effort, which would result in their direct competitor, Noranda Nickel, a longstanding client of Northern, being overshadowed. Since Noranda contributes a hefty 60% to Northern’s revenue, it would be unwise to risk a bad relationship with them. By sharing efforts between the two contracts, Northern would be able to maintain existing relations with Noranda while attempting to capture a new segment of the industry. A SWOT analysis of the competition can be seen i n Exhibit 3. Strategy Summary Northern should bid for the deep project to advance its reputation in the industry. Though it may be a challenge for the company, being a difficult  job, there is no reward without risk, and it is crucial to their growth strategy to grab the opportunity that has been presented to them. This being said, attempting to overshoot their technical ability may result in poor execution, and therefore, Northern should focus their efforts towards the successful execution of the deep job. Northern can bid at a competitive price while maintaining its gross margin requirement, as it stands ahead of the competition in terms of expertise, and the complexity of the deep job justifies a marginally higher price.

Saturday, November 30, 2019

The Complexities Of Mephostophilis Essays - Fiction, Literature

The Complexities of Mephostophilis In Medieval cycle plays, devils were portrayed as comic characters that triumphed over their adversaries in spite of their crudeness and ineptitude. With the advent of Renaissance drama, came new ideas and characters, as playwrights took a new stance in their portrayals of evil and devils. The devils and Mephostophilis in particular, in Christopher Marlowe's play Dr. Faustus are much more complex than those in preceding medieval drama are. Mephostophilis's only goal in the play is to acquire Faustus's damned soul for Lucifer. As straightforward a goal as this might appear, its execution becomes fascinating for the audience because of Marlowe's characterization. Mephostophilis is both friend and archenemy of Faustus. He is the teller of truths and the manipulator of lies; he is a reflection of Faustus's own character and an instrument of Lucifer's diabolical quest. Mephostophilis's diversity of characteristics makes him a most interesting Renaissance character because h! e is not flat, all good or all bad, but rather a multifaceted character, which wins over Faustus and draws the audience in with his intrigue. The play opens in Faustus's study, where Faustus is contemplating his many scholastic accomplishments. Having succeeded in his studies in both the academic and theological fields, Faustus has become bored and wishes to pursue further knowledge in necromancy. He conjures up the image of a devil and so begins the relationship between Dr. Faustus and Mephostophilis. Dissatisfied with Mephostophilis's demonic appearance, Faustus commands him, "I charge thee to return and change thy shape, /Thou art too ugly to attend on me"(I.iii.25-6). Faustus is uncomfortable with the devil's original appearance; he foolishly believes that, "by fiddling with surface matters,"(ix) the basic morality of the character can be changed. "Go and return an old Franciscan friar,"(I.iii. 27) says Faustus; this form not only makes Faustus more comfortable with the devil, but a Renaissance audience would have found this transformation more attractive and palatable as well. Without a word, Mephostophi! lis leaves to obey Faustus, and Faustus takes this as a sign of the devil's submissiveness. Faustus is falsely convinced that he is in control of the situation and that Mephostophilis has appeared only to fulfill his whims and to serve as his servant. He muses to himself, "How pliant is this Mephostophilis, /Full of obedience and humility, /Such is the force of magic and my spells"(I.iii.31-3). When Mephostophilis enters as a friar, Faustus is seeing what he wishes to see. The character of Mephostophilis remains as amoral as ever, but in the guise of a harmless friar, he appears more amiable. Our initial glimpse of Mephostophilis shows the audience and Faustus his true, horrifying nature. Along with this horrifying appearance early in the play, we see his only purpose is the capture of Faustus's soul. Despite Mephostophilis's transformed outward appearance, his purpose remains as malevolent as ever. As Mephostophilis quickly gains Faustus's confidence, the audience is able to peer further into his character. Virtually elated with his magical success, Faustus is oblivious to the ominous reason Mephostophilis gives for appearing. Contrary to what Faustus believes, the incantations he performed did not conjure up a devil; Mephostophilis explains, "when we hear one rack the name of God, /Abjure the Scriptures and his saviour Christ, /We fly in hope to get his glorious soul"(I.iii.46-8). Faustus scoffs at Mephostophilis and explains that he is not afraid of the ideas of hell and damnation, for he does not believe that they exist. The notion of hell is not so meaningless to Mephostophilis, who knows the torment of hell only too well. "Think'st thou that I who saw the face of God /And tasted the eternal joys of heaven /Am not tormented with ten thousand hells /In being depr! ived of everlasting bliss?"(I.iii.76-9) he demands of Faustus. Though he desperately seeks Faustus's soul, Mephostophilis cannot hold himself back from expressing the absolute truth of hell and its agonies. Faustus has already convinced himself that he wants what Mephostophilis can offer him and he refuses to listen to this important and solitary warning. He sends him off to tell Lucifer of his proposition to give his soul in exchange for twenty-four years of power and Mephostophilis's services. As Faustus sits waiting

Tuesday, November 26, 2019

Critically review Essays

Critically review Essays Critically review Essay Critically review Essay Critically review the situation at RestaurantCo and provide recommendations to the Board on the strengths and weaknesses of it approach to managing human resourceso Due Date: 20 sept 2013 There are a number of factors that may contribute and affect the success of an organization. It is the money (capital), materials and machinery but it also refers to the people and their knowledge and skills that make the actual difference. Human Resource Management refers to the organizational function that deals directly with employment relationship, (the relationship between the organization and the employee); it covers establishing (recruitment and selection of stafO, maintaining (ongoing training, career development and motivation) and terminating (retirement, resignation, dismissal, redundancy and retrenchment) an individual or group of employees (Barrile Cameron, 2010). This essay will explore the strength and weakness of different styles of managing human resource in an organization, articularly with the case of RestaurantCo, providing possible feedback and recommendations to the Board. RestaurantCo is a restaurant developed from a small family owned business in the 1960s and have experienced a period of rapid growth during the 1990s and have turned Trom Trancnlsea operatlons to a prlvate owned Dranoea cnaln large non- unionsied restaurant. Tthroughout these years, the organization experienced organizational change and in order to manage the change, RestaurantCo need to anage its human resources effectively and efficiently. (Suter,Je Marchington,M. 2012). There are two main arguments about managing human resources in most organizations, which are either to be centralised or decentralised. Centralisation is described as the location of decision-making power (Barrile Cameron, 2010 pp264). A centralised organization will reserve decision-making power in the sequence from top to down (Top management usually CEO of the organization to lower management usually front-line managers or supervisors).

Friday, November 22, 2019

Essay on Women and Men in the US

Essay on Women and Men in the US Essay on Women and Men in the US Example essay: Major issues facing women and men in the U.S. today There are very many issues that are facing both men and women in the U.s today. The effects are far reaching although others do not have very significant outcomes. Gender disparity is mong the major issues that are known to affect people in the U.S. The population in the United States has been established to be having many women than men. However, this is not depicted in the public area. The Supreme Court for instance has a higher male population than women. The country? presidents from Regan to Obama have tried to eliminate this disparity by making special appointments of females judges into the Supreme Court. Another issue that is facing men and women in the U.S is the one that pertains to abortion. Facts, information and statistics about abortion and pregnancy in the U.S place a lot of evidence on teens being the most affected. There have been increased cases of sexual assault, rape, prostitution and domestic violence. In one way or another, either a man or a woman is being victimized. In many occasions, it is women who fall victim due to the notion by the society that they are a weaker sex. There are facts, statistics and stories that surround abuse and survival together with the appropriate ways that can be adopted to reduce these forms of abuse. In all creations, all people seek for love and intimacy. Yet, it is becoming evident that neither of them is a certain thing. People are different; some seek for soothe and stability while others have the desire for excitement and experimentation. As humans, we may know one another, but it is also a fact that it takes two to tangle. Currently, the issues that pertain to women? reproductive rights and the diverse forms of contraception are widely and legally accessible to all women in the U.S. Other issues that have been seen to affect people in the U.S are those that are linked to pay equity, healthcare, and leadership, feeding habits, obesity and citizenship. All these factors have a way in which they affect the people. What is important though is how the society approaches and tries to find solutions towards solving them in a more amicable manner. I would say that there are many problems that face men and women in the United States just like any other country of the world whether developed or not developed. In comparison to the less developed countries and more specifically those that are non-democratic, America is more dwarfed in the way her people are faced with the problems. Some of the problems are as a result of the religious doctrines that permeate abuse and pose subservient regulations on those who are linked to social problems. Sometimes, it becomes very hard to contemplate on the traditional, feminist issues and think of obtaining a female president in the U.S unless more women and men start cherishing diplomacy endowed with more actions and soft power. Such issues can also be overcome if more women get involved in business activities and political positions so that their voices, votes and plans can be felt. An opinion I have held over time now is that gender issues will always continue to be factors in social interactions. This is due to the loopholes that the society has allowed to prevail. For instance, the feminist issues that are still being talked about in the current society are majorly applicable to those who are aware and relish freedom. It is also appropriate for those who want a gentler and comfortable society. Although the U.S is in pursuit of these key factors, it is none the less faced with issues of gender disparity and discrimination. To make sure that gender issues are eliminated, then it is imperative that all of us exert positive influences that will terminate the undercutting on one another. It is also very vital that the society learns to have faith on one another. It should also develop an innate belief in the ability of women to lead in a diligent way. The society should also make sure that it rises up an entity and extends its hand throughout the aspects of develo pment in the spirit of change that will impact positively on the lives of our sisters, not only in the United States but also to the rest of the world. At you can easily buy essay online on Women and Men related topics. Our custom essay writing company will help with writing your essay, term paper or research paper on any topic.

Wednesday, November 20, 2019

French new wave Essay Example | Topics and Well Written Essays - 750 words

French new wave - Essay Example This paper will analyze a particular movement in it which is called French New Wave. One would make no mistake that after the World War II the cinema in France was experiencing revival. Indeed, 1950’s and 1960’s were the decades when talented directions were trying to construct their own unique vision of the world and convey it with the help of their films. At first the public as well as the critics did not accept this novel approach in a positive way, considering it to be raw, absurd and completely lacking any aesthetics. However, over time the bold new vision of the film makes was praised and accepted. Nevertheless, the decline of interest toward French New Wave emerged in 1980’s with new cultural dominant appearing in the global artistic environment. Considering the development of the above mentioned movement, one can not help noticing that it has been largely influenced by the American noir films as well as the directors who made them. In other words, it is not the mainstream Hollywood movies that shaped their worldview, but rather those movies which were created by true masters of their trade (Kaplan 2009, p. 56). Indeed, the French directors wanted their movies to have design and aesthetics that would be characteristic to one director only, creating the world which can not be confused with the work of someone else. It is quite obvious that the analysis of French New Wave may not be completed without examination of its formal and narrative styles. Speaking of the former, it must be noted that the directors experimented with new techniques of editing and tried to present their movies in an unusual manner. For example, tracking shots or jump cuts were frequently used to show the fragmentation of the narration (Marie 2003, p. 43). Long shots were used primarily to organize the visual environment and present the audience with a better understanding of the general situations. Another point that should be

Tuesday, November 19, 2019

Journal Essay Example | Topics and Well Written Essays - 750 words - 3

Journal - Essay Example As an initial matter, being in a multiple mixed-culture country exposes one to a variety of ideas and perspectives. This is because there are layers upon layers of cultural variants. You cannot even speak of Korean-Americans as a totally homogenous group because there are different generations of Korean-Americans. For example, a second generation Korean American is likely to view Korean and American values and traditions differently than a second-generation Korean American. You may ask questions about the Korean War or the current conflict between North Korea and South Korea and receive different answers or different philosophical or theoretical approached to the issue being discussed. Some Americans may not even know about the Korean conflict; in the culturally mixed context, however, there are always some people with knowledge or first hand experience. In America, for example, there are former Russians from the Soviet Union, there are Vietnamese who were military leaders during the war, there are Jews who survived the Holocaust, and there are people with nearly every conceivable experience in our world. In a very real way, by having such a diverse population, it is very much like having a human encyclopedia within America's national boundaries. There is an additional benefit not offered in culturally homogenous countries; more specifically, people can actually immerse themselves in different cultural settings and traditions without having to travel abroad. In America, for example, there are many parts of the country where certain cultural traditions have manifested themselves physically in the form of towns or regions. In San Francisco, you can visit Chinatown or Little Italy. In Los Angeles there is an officially recognized Thai Town. All over the country there are places where cultural traditions are proudly displayed. A person wishing to experience some of the Chinese culture, for instance, does not necessarily need to fly to China. You can visit a Chinatown, whether in San Francisco or New York, and have a similar experience. Many of the people will be speaking Chinese, shops are operated in much the same way as in China, and the Chinese language and symbols are to be seen everywhere. There was a famous Hollywood movie, the title which I cannot recall, where a Chinese-American told a policeman "this is not Brooklyn. This is not even New York. This is Chinatown." The point is that the multiple mixed-race countries offer people to immerse themselves to some extant and therefore learn about and from other cultures. One weekend might be celebrating the Chinese New Year and another spent experiencing a traditional Catholic mass in Little Italy. It is very much like having many countries in one. Finally, it is fascinating to observe and learn how people from different backgrounds, be they racial or religious, can co-exist in furtherance of a common good. It would be inaccurate to suggest that all races co-exist harmoniously. This is simply not the case; nonetheless, it is amazing to see how well the majority of people get along well

Saturday, November 16, 2019

Pros and Cons Essay Example for Free

Pros and Cons Essay Globalization can be defined as the increasing flow of products, people, money, and ideas across the globe. National economies are being swept into the global economy. One can thus think of globalization as rushing through four channels: †¢ Freer trade goods; †¢ Freer mobility of labor; †¢ Freer investment; and †¢ Freer communication, thanks to telecommunications and the Internet. Pros and Cons 1. Capitalism Free enterprise is now the dominant economic system in the world. China is very much capitalist and her late Communist Party leader Deng Xiaoping coined the slogan, â€Å"To get rich is glorious. † Only Cuba and North Korea are holding on to the central planning system of running the economy. Capitalism brings along free trade and the free flow of money across the earth. Countries belonging to the World Trade Organization are trying to bring down tariff barriers. Today, immense portfolio investments zip in and out of countries at the click of a mouse (Baylis Smith, 2001). With free trade comes economic integration. It is possible to download an album of songs in the United States of America, turn it into CDs in Europe, print the cover and lyric sheet in France, and sell it in Asia. The greatest story of economic integration is the European Union, with its common currency, the euro (Brecher Costello, 2004). 2. Information economy Another driving force is the knowledge economy. Land, labor and capital are bowing in importance to brain creativity. In the United Kingdom, over a three-year span, manual jobs dropped by 750,000, while professional jobs shot up by 1. 5 million (Brecher Costello, 2004). 3. Mass Media The invention of the printing press helped scattered people become a national community. In the same way, the evening news is nurturing world’s community. The suffering in India and Indonesia are brought home through CNN. 4. Telecoms There is a global boom in telecommunications. A fourth of all Europeans, have mobile phones. The people in Finland gave the greatest access to cell phones at 417 for every 1,000 people (Brecher Costello, 2004). Reference: 1. Baylis, John, and Smith, Steve, eds. The Globalization of World Politics. 2nd ed. , 2001. Oxford: Oxford University Press. 2. Brecher, Jeremy, and Costello, Tim. Global Village or Global Pillage: Economic Reconstruction from the Bottom Up. Boston, MA: South End Press, 2004. Radical critique of recent patterns of economic globalization.

Thursday, November 14, 2019

A Students View Of Paulo Freires Pedagogy Of The Oppressed Essay

A Student’s View of Paulo Freire’s "Pedagogy of the Oppressed" Freire was one of the most radical insistent educational thinkers of his time. He proposed his own educational theory for society. His argument was for an educational system that focused on creative learning and freedom. Freire’s method was known as "the problem posing" concept. It would allow students and teachers to communicate through dialogue while both are equally responsible in the learning process. Freire’s assessment of education did not support a system that mechanically deposited and reproduced pre-selected information with no communication or dialogue from the student. He feared this would manage and oppress society. This method was known as the "banking" concept. I am of two minds about Freire’s claim that the problem posing concept is most effective. On the one hand, I do agree that the problem posing concept is often effective in the freedom of creativity in certain subjects such as art and creative writing. On the other hand, the banking concept is a necessary evil because it sets down the foundation of education in subjects such as English, science, and mathematics. In the problem posing concept the teacher and the students work together through communication. The teacher no longer just teaches and the students no longer just listen. They both are in dialogue and are able to teach and learn from each other. With this method the students are allowed to share their own ideas and freedom of expressions. When a student expresses his/her thoughts with others he/she is challenged and becomes more aware of his/her own reality, allowing transformation into the world of freedom and not domination. Jone Lewis cites Freire who says, "Education either functions... ...ed to being shaped. The student must be able to be creative and see the world freely as a reality in progress. Freire also claims that this concept may be resisted by the oppressing classes to any changes in class. He insists that the banking concept of education is a ready- to- wear approach. A student is an object to be filled with pre-selected information. This approach he believed minimized a student’s creativity thus making him/her adaptable and more manageable in society. My feelings on these issues are truly mixed. I do believe that a student should be able to do more than reproduce pre-selected information while learning. On the other hand, I feel that it is important to learn the basic facts first. I do agree that the problem posing concept is effective in some subjects, however I think other subjects of education are better served with the banking concept.

Monday, November 11, 2019

Investment and Risk Tolerance Essay

Question 1: How do the concepts of behavioral finance create opportunities for HelloWallet? The current financial advising sites such as HelloWallet as well as its competitors, such as Mint.com and Yodlee, provide budget and virtual financial advising service based purely on user bank transactions and spending category. The HelloWallet system allows the user to create and track customized budget plan. What is more important is that the system can automatically provide financial advice and saving tips by using data mining techniques. However, HelloWallet and its competitors do not provide any financial analysis and evaluation based on user behavior and their psychographic characteristics, such as user personality, values, attitudes, interests and risk tolerance in terms of willingness. These psychographic classifications are extremely relevant with regards to individual strategy and risk tolerance. Even with the similar bank transactions data and spending category, an investor background, past experience, personality and attitudes can make investment process unique for each individual. With the help of behavior finance theory, HelloWallet can build system to fit psychographic profiles to specific behavioral investor profile. As a result, a better understanding of user behavioral tendencies of spending and investment will help to provide better financial advice. An easy and quick way is to build online questionnaire to fit each individual into different behavioral investor types. There are several models we can use, Barnewall Two-way model, Bailard, Biehl, and Kariser Five model and Pompian model. We use Pompian models as an example. The major reason for promoting Pompian is because it is less time-consuming and less complex. Therefore, it will be easy to be implemented on an online system and require less time spent on filling out the survey (as we pointed out in challenge, it is not an easy task to ask online user to fill out survey with a lot of details). Pompian model identifies four behavioral investor types based on risk tolerance and active/passive scale: passive preserver, friendly follower, independent individualist and active accumulator. It is a top down approach which is more efficient and simple by categorizing users into passive and active, then further break down into four types based on their risk tolerance. With these information, the user of HelloWallet will be categorized based on their investment/spending behavior type. Based on these different types, the system can easily provide more tailored investment tips and products to users. For example, once a user behavior type is identified, the system can provide saving and investment tips accordingly. For example, when a user is identified to be a passive preserver whose risk tolerance is low and emotional, the system provides low risk financial products (excluding high risk ones), e.g., 2-year GICs. In addition, the system can try to persuade the soundness of these financial by focusing on elaborate the goal of these investment (what the terminate value will be and what type of investors these investments for). If investor specify a long term income need, the system can provide financial products on bond index fit their spending goal (contrary to the current systems which spam non-relevant financial products to all the users without differentiate their needs and risk). With the introduce of the behavior investor/user types into the systems, HelloWallet can extend their financial advising service from purely creating budget plan and providing saving tips to a more sophisticated investment approach that fits each individual unique needs and background. For example, HelloWallet is currently able to recommend a customer to apply for a visa with $500 cash points per year because excessive spending on grocery and large cash deposit 10,000 in the checking account. With the new behavior investor model, it can recommend the same individual to invest short term money markets products if his risk tolerance is low and require short term liquidity (with a list of the products from different dealer) or it can recommend user to buy equity income mutual fund if their risk tolerance is high and has no need for the cash for the near term. Another advantage and opportunity for the HelloWallet is that behavior finance is a relatively new concept and traditional financial advisor feel uncomfortable to ask customer these psychological questions face to face. It is much easier for the user to interact with a computer to fill out the questionnaire. This will help to collect more accurate information to build solid virtual financial advisor-client relations which also benefit the HelloWallet business in the long term as clients are tend to stick to the same â€Å"advisor†(in our case a virtual financial advisor – HelloWallet) if she/he understands clients’ needs better. Question 2: How do the concepts of behavioral finance create challenges for HelloWallet? HelloWallet’s system creates customized budget plans for the users based on traditional finance and on trend analysis. This poses a challenge to HelloWallet because they do not incorporate the behavioral aspects of their clients. This will lead to creating recommendations that are not suitable to all their clients. Many models have been developed over the years to incorporate behavioral finance traits in the client’s portfolios. There are four different models that attempt to explain the behavior of individuals and their implications on portfolio construction: The Consumption and Savings Model, the Behavioral Asset Pricing Model, the Behavioral Portfolio Theory and finally the Adaptive Markets Hypothesis. Empirical studies show that some investors exhibit mental accounting where they separate their investments in different accounts in their heads and assign them to different expenses, forgetting to look at them as one portfolio. In this instance this will cause a part of HelloWallet’s target market to refrain from using their software due to this behavioral trait. Clients that have regret aversion and have been suffering from mental accounting will be too scared to adopt HelloWallet’s service out of fear of realizing that they are in financial distress. Those clients do not have a serious desire and readiness to engage in an assessment of their personal financial health; therefore it will limit HelloWallet’s penetration of this market. This intertwines with cognitive dissonance, where people avoid facing financial reality. Statistics show that a vast majority of people suffers from that. People feel discomfort from receiving information that contradicts beliefs th at are entrenched in their personalities. Therefore, not wanting to face the idea that â€Å"things may not be ok† is a huge barrier for the adoption of HelloWallet by customers. Naturally humans are prone to resistance to change. They are programmed to stay in their comfort zone and stick to what they are familiar with. Having to take advice from a computer might not be something easily accepted. Moreover, regard to HelloWallet model, clients should incorporate all of their accounts including their assets and liabilities and update them if needed. This process could be a barrier for people suffering for status quo bias. In fact, this bias is an emotional bias in which people tend to do nothing instead of making change. This will affect Hellowallet in two ways. Firstly it will prevent people from registering, as they will prefer sticking with their old traditional way of managing their finance. Secondly, it will reduce the efficiency of the company model, as people will update their data less frequently making inaccurate any outcome from model of HelloWallet. The way HelloWallet collects clients’ information is via its software online. Users input their answers to HelloWallet’s questionnaire after which they will be categorized and given a budget plan. However individual circumstances change over time, and sometimes change abruptly. As the client moves across his life stages his information should be updated and changed accordingly, but this is not the case. Therefore HelloWallet might suffer from information processing bias known as Anchoring & Adjustment Bias. This will lead to the clients’ results being anchored to assumptions and information that does not hold true anymore. In fact, the Adaptive Market Hypothesis states that adapting is actually necessary for survival; thus, changes need to be applied to the software occasionally to improve chances of meeting clients’ goals. Anchoring and adjustment bias will make it more difficult for clients to adapt. If the users have a bad experience due to this bias, HelloWallet will start losing business to its competitors. Similarly the lack of personal interaction with customers will result in uncomfortable clients that will not understand the effects of short-term deprivation in relation to the overall long-term savings outcome. The lack of personal interaction will also destroy value. The company will not be able to build and maintain a consistent approach with its clients, if they are dealing with a computer. If there is no relationship building, the client will move to the competitor or just do his budget by himself after the first negative experience. It might not be sustainable, and might prove hard to retain customer value using this approach. In addition to that, research showed that people tend to behave impatiently today but plan to act patiently in the future. This is known as self-control bias. The all point of financial planning is to be able to help client to better allocate their financial resources to meet their short-term liabilities and goals while saving for future or long terms needs. The efficiency of HelloWallet advice on personal financial planning depends on how responsive client will be to their advice. In this case, this bias could be an issue, as clients will tend to choose what they prefer (short term satisfaction) instead of what suit best to their financial situation and neglect the long term.

Saturday, November 9, 2019

Literal/ Golden/ Mischief Rules Essay

The literal rule is the primary rule which takes precedence over the others. Words and phrases should be construed by the courts in their ordinary sense, and the ordinary rules of grammar and punctuation should be applied. If, applying this rule, a clear meaning appears, then this must be applied, and the courts will not inquire whether what the statute says represents the intention of the legislature: ‘The intention of Parliament is not to be judged by what is in its mind, but by the expression of that mind in the statute itself’. The literal rule is strongly criticised by many lawyers. It has been said to be ‘†¦.a rule against using intelligence in understanding language. Anyone who in ordinary life interpreted words literally, being indifferent to what the speaker or writer meant, would be regarded as a pedant, a mischief-maker or an idiot’. Such criticism, it is submitted, is misguided. For example, the Hotel Proprietors Act 1956 provides that in certain circumstances an hotel proprietor is liable for loss of or damage to guests’ property, but that this liability does not usually extend to guests’ motor vehicles or property left ‘therein’. The question arises – is the hotel proprietor liable for property left on, rather than in, a vehicle, for example, on a roof rack. On a literal interpretation, the hotel proprietor is liable, because if Parliament had intended to exclude property left on a vehicle, the Act would have said ‘therein or thereon’. The ‘common-sense’ school would say that it is ridiculous to make a distinction between property left in or on a vehicle. That may be so in the admittedly trivial example given, but if this line of argument is accepted, it means that the courts would have power to rewrite Acts of Parliament, which many people would consider to be highly dangerous, particularly where it takes the form of assuming that Parliament ‘intended’ something, when in truth it is more than likely that Parliament never gave that matter a moments’ thought. It is better that the courts interpret statutes strictly, and if this leads to unsatisfactory or inequitable results, then Parliament should pass amending legislation to indicate clearly what its intention was. The full force of the literal rule was demonstrated in the case of Whitely v, Chappell (1869). The defendant had voted in the name of a person who had died, but was found not guilty of the offence of personating ‘any person entitled to vote’: a dead person is not entitled to vote. Golden Rule Where the meaning of words in a statute, if strictly applied, would lead to an absurdity, the golden rule is that the courts are entitled to assume that Parliament did not intend such absurdity, and they will construe the Act to give it the meaning which Parliament intended. So, for example, the Offences Against the Person Act 1861 provided that ‘whosoever being married shall marry another person during the life of the former husband or wife’ is guilty of bigamy. Re Sigsworth 1935 provided that the Defendant was not entitled to inherit because it would be manifestly repugnant to allow a murderer to reap the benefit of his crime even if the Defendant is the only inheritor. Interpreted literally, this definition is absurd on two counts. First, the phrase ‘shall marry another person’ is meaningless in the context, as the essence of bigamy is that a married person cannot marry again while his first marriage subsists. Secondly, the reference to a ‘former’ husband or wife is quite inappropriate. The word ‘former’ suggests that the original marriage no longer exists, but if that were the case the person marrying again would not be guilty of bigamy. Despite the slipshod draftsmanship of the Act, however, the intention was clear, and the courts have interpreted the relevant section as meaning that a person who purports to marry another while his or wife or husband is still alive is guilty of bigamy. Mischief Rule When it is not clear whether an act falls within what is prohibited by a particular piece of legislation, the judges can apply the mischief rule. This means that the courts can take into account the reasons why the legislation was passed; what ‘mischief’ the legislation was designed to cure, and whether the act in question fell within the ‘mischief’. For example, the Street Offences Act 1959 made it an offence for a prostitute to solicit men ‘in a street or public place’. In Smith v. Hughes the question was whether a woman who had tapped on a balcony and hissed at men passing by was guilty of an offence under the Act. Parker, L.C.J., found her guilty: ‘I approach the matter by considering what is the mischief aimed at by this Act. Everybody (sic) knows that this was an Act intended to clean up the streets, to enable people to walk along the streets without being molested or solicited by common prostitutes. Viewed in that way, it can matter little  whether the prostitute is soliciting while in the street or standing in a doorway or on a balcony’. In the case mentioned, it was comparatively easy to apply the mischief rule as the circumstances which caused the passing of the Act were well known. The rule does, however, have limitations as it is by no means always easy to discover the ‘mischief’ at which particular Act was aimed. The rules of interpretation discussed above do not apply to the interpretation of EEC legislation. The European Communities Act 1972 provides that questions of interpretation of EEC law must be decided in accordance with the principles laid down by any relevant decision of the European Court. Therefore, although EEC legislation has the force of law in England and thus becomes part of English law, the courts cannot interpret it by the methods which they apply to the main body of English law. In interpreting statutes, the courts make certain presumptions: (a) that the statute is not intended to have retrospective effect; (b) that it applies only to the United Kingdom; (c) that it is not intended to interfere with existing vested rights; (d) that the property of any person will not be confiscated without compensation; (e) that there is no intention to interfere with existing contractual rights; (f) that there is no intention to interfere with personal liberty; (g) that any person to whom judicial or quasi-judicial power is given will exercise such power in accordance with the rules of natural justice; (h) that the statute is not intended to derogate from the requirements of international law. Any of these presumptions may be overruled by the precise words of the statute. Private Acts (but not public Acts) always have a preamble which sets out the objects of the legislation. Preambles can on occasion be of considerable assistance to the courts in interpreting the Acts.

Thursday, November 7, 2019

How the English Days of the Week Got Their Names

How the English Days of the Week Got Their Names English speakers often take for granted the impact other languages have had on our own. The names of the days of the week, for example, owe much to the blend of cultures that influenced England over the yearsSaxon Germany, Norman France, Roman Christianity, and Scandinavian. Wednesday: Wodens Day Woden’s connection to Wednesday draws its name from the one-eyed god  known as Odin. While we associate him with the Norse and Scandinavia, the name Woden itself appeared in Saxon England, and elsewhere as Voden, Wotan (his old German moniker), and other variations, all across the continent. His image hanging from a tree with a single eye is reflected in many modern day religions.   Thursday Is Thors Day The mighty Thunder God was respected as Thunor among our ancestor culture in England, and his own influence as both the principal deity of Iceland and the international movie-star in Marvel movies  sits well alongside his more mysterious father. Friday: Freyr or Frigg? Friday can get tricky, as one can draw fertility god Freyr from the name, but also Frigg, Odin’s wife and goddess of hearth and home. Our common connotation shows Friday as a day of reaping (our paychecks) or returning home (for the weekend) so both could feasibly be the origins. A mythological mind might point to Frigg, our ancient mother, calling us home and giving us a family dinner. Saturn-Day Saturday pays homage to Saturn, that old force that appears in Rome, Greece.  Many might associate the name with pagan rites like â€Å"Saturnalia† or solstice festivals, which were (and still are) incredibly popular in both Northern and Western Europe. Old father time rests on this day, which conventionally ends the week in both the US and the Middle East, as a day of rest. Sunday: Rebirth as the Sun Returns Sunday is just that, a day celebrating the sun and the rebirth of our week. Many Christian sects point to this as the day of ascension when the Son rose and went back to heaven, bringing with him the light of the world. Solar deities beyond the Son of God stretch back universally, found all over the world in every single culture there is, was, and will be. It’s fitting that it should have a day all its own. Monday: Moon Day Likewise, Monday pays homage to the moon, the principal body of night. Monday has a good deal in common with the German name Montag, which translates as day of the moon. While Quaker heritage in the US calls it the second day, it is also the first day of the work week in Western culture, assuming that the first day is ascension on Sunday. In Arab and Middle Eastern cultures, Monday is also the second day of the week, which ends on Sabbath Day Saturday and starts again the day after, likely due to the shared Abrahamic religion, Islam. Tuesday Honors the God of War   We end this trip on Tuesday. In old German, Tiw was the god of war, sharing similarities with Roman Mars, from which the Spanish name Martes is derived. The Latin word for Tuesday is  Martis dies, Marss Day.  But another origin points to the Scandinavian God Tyr, who was also a god of war and honorable combat.

Monday, November 4, 2019

A Review Of Employee Management Systems Information Technology Essay

A Review Of Employee Management Systems Information Technology Essay Nowadays, Employee Management System is being adopted by many sectors in the real world whether it is small or large scale. But currently most of the fast food restaurant does not have this system implement to the website. Thus, the author decided to develop a web-based employee management system for fast food restaurant. The system will be built consists of human resource management function such as leave request, employee report and job application, this function will be integrated to this web-based system. The aim of this project is to design and develop a web based Employee Management System using PHP and MySQL. In this project, a web-based Employee Management System will be developed for Carl’s Fast Food restaurant to manage employee job information, working schedule, leave request, employee report on achievement, training and evaluations. In addition the system will also manage job application information that apply job online by visitor. In this web-based system basica lly it has 4 main users that are administrator, manager, employee and visitor. For employee, manager and administrator they can login to the system through online to perform their different task respectively that available for them, for visitor they can apply job. Where manager can do managerial work such as view/modify/create employee report, in addition it also can approve/deny/view leave request, accept/decline/view interview for job candidate, search for employee information and modify/view employee schedule. Manager can upload a doc file to the administrator, if there is any change about employee and manager information. In addition manager can search for specific employee information, view and print information. In employee, it can request leave and check for leave request whether their leave is approve or deny. Employee also can view working schedule that has been arrange by the manager and search for colleague to view their basic information. Administrator has just a small t ask such as create new user if there is any new employee, manager and administrator. In addition, it also can modify user information and delete user, and download doc file that uploaded by the manager to update the require information. And lastly the visitor can apply job online through the job application This web-based system is important where it can improve the way of managing and keep track of employee information such as leave request, employee performance report and others. Thus, this can determine the success level of the fast food restaurant. 1.1 Company Background Carl’s Fast Food Restaurant is one of the fast food restaurants in Malaysia, located at Cheras, Kuala Lumpur which founded in the year of 2008. This fast food restaurant is relatively similar to another fast food restaurant, which primarily sells french fries, fried chicken, hamburger and soft drinks. The restaurant has a traditional way and manual system of managing their employee information, hence the restaurant itself has the intention to improve the management of their employee. 1.2 Problem Statement One of the problems of the current Carl’s Fast Food restaurant is, they still using the manual way of managing the employee information and records, in term of keeping employee information such as employee leave request, employee report, and employee working schedule.

Saturday, November 2, 2019

Summary of Fat and Happy Essay Example | Topics and Well Written Essays - 500 words

Summary of Fat and Happy - Essay Example Mary Ray Worley, in her article, "Fat and happy; in defense of fat acceptance", emphasis's that there is another way of looking at being fat; that is one needs to accept one's body size and enjoy it. Coming to terms with your body size gives you the opportunity explore ways and means by which you can be yourself and practice healthy living. She states that most fat people rush through dieting programs in the hope of conforming to society's pressure of loosing weight only to gain it back. This is a waste of time and money and obviously not the solution to the problem. Hillel Schwartz in her article 'Fat and happy" shares the same notions above as Mary Ray Worley. She also asserts that its society that make fat people unhappy and discriminates against fat people like other minority groups. The two articles have successfully brought out the discriminations and the wrong perceptions of society about fat people. It enlightens the reader on the fact that been fat is no crime and accepting one's body weight is the best solution to the problem of being fat rather than going on numerous diets. Schwarz asserts that "What causes the most damage is not the actual weight itself, but the fear of weight.

Thursday, October 31, 2019

21 days Essay Example | Topics and Well Written Essays - 1000 words

21 days - Essay Example What to do? Today started well after two of my assignments received maximum points. However, my mentor put a dampener on my spirits by telling me I was falling behind my schoolwork. At times, I think I do not need a mentor, but she helped me a lot last semester. I also reconnected with an old friend Chris on Facebook, which was fun. Today I feel in need of inspiration, and I decide not to visit my mentor for two weeks. I attend a poetry club meeting, which was impressive, and it went some way in inspiring me. I also registered as a member of the drama club as I feel I need something to inspire me at school. Finally, Chris wanted financial help, and I feel I can trust him. Today my friends and I went bowling, and I did well. I bowled a 150, 166, and 160. However, I was still feeling downcast, especially during class. Another of my assignments came back with a C. I revised it and resubmitted it in the hope of getting a better score. I attended my first drama club meeting and felt lost, as there was such camaraderie among the other members. I forgot to write another assignment last night and had to do it in class today. After handing it in, I tried to write some poetry in class to lighten my spirits. On my way from class, I came across some lottery tickets, which had a jackpot of 140 million. Although, I purchased three tickets, I did not win, and neither did anyone else at that time so, I did not feel too downhearted. My mentor called me today and asked me to see her, which I did. I was not aware I was supposed to see her once every two days. I also lent my friend some $300, which I pray is not a mistake as he sounded desperate. The poetry is not improving my spirits, and I decided to try the drama club instead. Today, I managed to make two friends there and got to know how they interact. It was fun. Today was a very busy day with a surprise CAT test. One of my classmates was caught copying my work and

Tuesday, October 29, 2019

Economy Essay Example | Topics and Well Written Essays - 1000 words - 2

Economy - Essay Example Principles of Political Economy and Taxation was published in 1817. In this publication, Ricardo developed law of rent as well as the labor theory of money (Gonner, 2013). The theory of comparative advantage, as developed by Ricardo, tries to explain the benefit of engaging in international trade. The theory was initially discussed by Adam Smith in the Wealth of Nations. The theory was, however, clearly developed by Ricardo in the book On the principles of Political Economy and Taxation. In the development of the comparative advantage theory, Ricardo observed that if two countries with a capability of producing two products participate in free trade, each of the two countries will increase productivity by exporting the commodity that it has a comparative advantage in production. The country would then import the other commodity. In this theory, Ricardo implies that comparative advantage, and not absolute advantage, is responsible for international trade (Gonner, 2013). The example used by Ricardo to explain comparative advantage involved England and Portugal. In this example, the two countries produce cloth and wine. However, Portugal is more efficient in the production of the two commodities compared to England. England needs 100 hours to produce a unit of cloth and 120 hours to produce a unit of wine. Portugal on the other hand requires 90 hours to produce unit of cloth and 80 hours to produce a unit of wine. In this case, England requires 100 hours to produce cloth, which can instead produce an incomplete unit of wine. Portugal can produce a unit of cloth with few hours compared to England. However, Portugal must forego the production of more units of wine in order to produce a single unit of cloth. Although Portugal has an absolute advantage in the production of cloth, England has a comparative advantage in the production of cloth. In this example, England has a comparative advantage in the

Sunday, October 27, 2019

History and Properties of Rubber

History and Properties of Rubber History of Rubber Rubber was first discovered by the Indians living in Central and South America at around 1000 CE. The native people of the Americas used latex from the rubber trees (which they called it the cahuchu tree) and learned how to make waterproof clothes and footwears.1 They also used the latex to make bouncing balls for ball games.1 In 1736, a French explorer named Charles Marie de La Condamine travelled to Ecuador and discovered the Hevea tree (which is known as the rubber tree), he was the first European to have discovered rubber. He sent samples of this rubber to the French Academy of Sciences, this prompted their interest of rubber.2 Figure 1: Latex liquid collected from the Hevea rubber tree 3 In 1770, English engineer named Edward Nairne created several rubber cubes and discovered that they had erasing properties. This meant that they can be able to erase pencil marks, this was later confirmed by English scientist named Joseph Priestley.4 In 1768, a French Chemist named Pierre Macquer studied the properties of the rubber found in South America. He found that when rubber is dissolved in ether, flexible tubes can be produced 5, this has led to rubber being an important material to many everyday applications. In 1791, a British shoemaker named Samuel Peal developed a method for waterproofing cloth, this was done by mixing turpentine (which is an oiled that is attained by the distillation of resin from pine trees) with rubber.6 In 1818, a Scottish surgeon named James Syme manufactured raincoats from waterproof cloth made from rubber.7 This was then later developed by Scottish chemist named Charles Macintosh. In 1823, he developed a method of making better waterproof raincoats by dissolving rubber with naphtha (which is an oil attained by the distillation of coal tar) and then placing it with another cloth (in order to improve the thickness of the coat). The waterproof coat became known as the Mackintosh coat.8 Figure 2: The Mackintosh Coat 9 In 1832, the first rubber factory was built, it was known as the Rosburg factory. Regrettably, when the rubber products made from the factory were left in the cold, it made them brittle, and when they were left in the sun the rubber melted, leaving customers to be discouraged.8 For many years, scientists have tried to develop new methods of increasing the strength of rubbers without being successful. However, in 1839, an American chemist named Charles Goodyear had accidently discovered a new way of making rubbers more durable. What he done was he accidentally dropped some mixture of natural rubber and sulphur on a hot stove, this has led to the vulcanization of the rubber. 8 In 1845, a Scottish inventor named Robert William Thompson invented the pneumatic tyre, this consisted of an inner belt made from natural rubber that was inflated with air, this was a major development to the motor industry because heavy steam engines could be able to travel on the roads without damaging the surface, this was further developed in 1869 where solid and hollow rubber were used to make the tyres. In the 1850s, rubber toys were being produced. 8 In 1876, an English explorer named Henry Wickham smuggled several seeds from the Hevea brasiliensis (which is the rubber tree found in Brazil) and took it to England. The English exported these seeds around the world, this has led to the increase in the supply of natural rubber around the world. 10 In 1883, an American chemist named George Oenslager developed a new method of accelerating the vulcanization of natural rubber with sulphur.7 He converted aniline into thiocarbanilide because it was easier to handle. From several experiments he conducted, he found out that thiocarbanilide was a good rubber accelerator for the vulcanization process. He was the first person to use carbon black as a filler for the rubber because it increased the strength of the rubber. 11 In 1909, a German scientist named Fritz Hofmann and his fellow scientists produced the first synthetic rubber known as methyl isoprene however the problem with this rubber is that it was expensive to make.12 In 1930, an American scientist named Wallace Carothers and his team produced a compound called chloropropene which then polymerised to form a solid which had a rubbery texture. The team had found out that the properties of this new polymer was similar to that of natural rubber. This polymer was named as Neoprene and was the first commercially successful synthetic rubber.13 Also in the 1930s, a German chemist named Walter bock had developed a new synthetic rubber which had better properties than that of natural rubber. He first tried to copolymerise dimethyl butadiene with isoprene and butadiene, this was successful as the new polymer had similar properties to the natural rubber. He then replaced dimethyl butadiene with styrene and copolymerised with butadiene, the polymer was named as SBR (styrene-butadiene rubber). This polymer was better than natural rubber because it did not wear out quicker than its counterpart, the polymer was later known as Buna-S for commercial purposes. 14 A better synthetic rubber was later developed by copolymerising acrylonitrile with butadiene, the polymer was known as NBR (Nitrile-butadiene rubber), it was the later known as Buna-N for commercial purposes. In 1940, an American inventor named Waldon Semon produced a new synthetic rubber known as Ameripol, this was made by copolymerising butadiene with methyl methacrylate. This synthetic rubber was cheap and easy to make, so it was a no-brainer that it was used in World War 2, and helped out rubber companies such as the Goodyear Tyre and Rubber Company during the war. After the war, the need for natural rubber died down, and the need for synthetic rubbers increased dramatically.15 In the 1960s, EPDM (which is known as Ethylene propylene Terpolymer Rubber) was produced. The rubber is made by copolymerising by a diene derivative, ethylene and propylene. The rubber has many advantageous properties over the synthetic rubbers, one of them is that they have good electrical insulating properties. EPDM rubber are now found in our everyday life such as hose, solar panels, electrical insulation etc.16 The use of synthetic rubber is on a steep rise, and many new rubber materials have been made duri ng the 21st Century. Natural Rubber How it is made? Natural rubber is produced by biosynthetic processes (in the form of latex which is a white liquid that is found when you cut the plant up) in many plants, but mainly from the Hevea Brasiliensis (The rubber tree coming from Brazil). There are two biosynthetic process to make latex. In the first stage, Acetyl-coenzyme A is converted to melavanic acid which then is then converted to iso-pentyl-pyrophosphate. The second process is the polymerisation induced by the first stage of the biosynthesis, from this process latex is created. The rubber form of the latex is then form by coagulating the latex particles. The rubber is made from a polymerisation of naturally occurring cis-polyisoprene. 17 Figure 3:Cis-polyisoprene, natural rubber 18 Properties of Raw Natural Rubber The rubber has a clear colour and hasnt got a well-defined shape and it is soft and sticky, however when the rubber is cooled down it crystalizes, so has a well-defined shape. The rubber has a low tensile strength meaning it tends to break if a low amount of tensile stress is put into it. It has a low abrasion resistance meaning the rubber will wear out quickly. It is soluble to organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a high elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between 10 0C to 60 0C, this means under hot conditions the rubber would lose its elasticity. Another pro perty of the natural rubber is that it absorbs a large amount of water this means that it will be always wet and would need to dry it out before the next stage of the process. 19 Advantage of Raw Natural Rubber The hardness of the rubber can easily be adjusted, so can be able to shape or coat any form of objects this is because the rubber has a high elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. It can be used as an electrical conductor or an electrical insulator. Can be able to absorb vibration and noise. It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. It also has a good surface friction so does not slide about easily. Disadvantage of Raw Natural Rubber The rubber can only be elastic between 10 0C to 60 0C, this means under hot conditions the rubber would lose its elasticity. The rubber has a low tensile strength meaning it tends to break if a low amount of tensile stress is put into it. It has a low abrasion resistance meaning the rubber will wear out quickly. It has a poor resistance to any organic compounds this is because It is soluble to organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). Another disadvantage of natural rubber is that it has a poor resistance to ozone meaning that when the ozone reacts with the double bonds it breaks, this causes a crack.20 The crack then grows steadily because of further ozone attacks so this causes the strength of the rubber to decrease massively and cause it to break. Another disadvantage of natural rubber is it has a poor UV resistance this also means that when it reacts with the double bond it breaks; this also means that cracks will from causing the tensile strength to be severely reduced meaning the strength of the rubber would be reduced massively and causing it to break. 20 Another disadvantage is that vulcanization of the rubber can occur spontaneously, so it is hard to control the raw state of the natural rubber. The vulcanization of Natural Rubber To improve the properties of the natural rubber, the process of vulcanisation is used to do this. Vulcanization is a process that involves adding natural rubber to a curing agent such as sulphur. The process is done under heat, so by heating the rubber in the presence of the curing agent the physical and chemical properties of the rubber would be significantly improved. The reason it does is, because when heating the rubber in the presence of the curing agent, the polymer chains are cross-linked by the agent, therefore the free-flowing macromolecules of the polymer chains becomes more rigid.21 Vulcanization must be under controlled condition to avoid creating a massive amount of cross-linking, this means that it will avoid making the rubber less elastic and more brittle. Figure 4: Cis-polyisoprene with sulphur cross-links after vulcanization 23 Properties of Vulcanised Rubber The rubber has a clear colour and it is hard and not sticky, when the rubber is cooled down it crystalizes, so has a well-defined shape. The rubber has a high tensile strength meaning it does not tend to break if a low amount of tensile stress is put into it. It has a high abrasion resistance meaning the rubber will not wear out quickly. It is not soluble to organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a high elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between -40 0C to 100 0C which is better than what the given temperature range is for the natural rubber in its raw state, thi s means under hot conditions the rubber would not lose its elasticity. Another property of the natural rubber is that it does not absorb a large amount of water this means it can be dried easily before the next stage of the process. 23 Advantages of Vulcanised Rubber The hardness of the rubber can easily be adjusted, so can be able to shape or coat any form of objects this is because the rubber has a high elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. It can be used as an electrical conductor or an electrical insulator. Can be able to absorb vibration and noise. It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. It is also insoluble to organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It also has a good surface friction so does not slide about easily. The rubber has a high tensile strength meaning it does not tend to break if a low amount of tensile stress is put into it. It has a high abrasion resistance meaning the rubber will not wear out quickly. The rubber can only be elastic between -40 0C to 100 0C which is better than what the given temperature range is for the natural rubber in its raw state, this means under hot conditions the rubber would not lose its elasticity. Another advantage of the vulcanized rubber is that it does not absorb a large amount of water this means it can be dried easily before the next stage of the process. It has a better resistance to ozone and UV this means that less cracks form than in its raw state. This means that it is less likely to break than the raw natural rubber. Disadvantages of Vulcanised Rubber If the vulcanized rubber is burned it can be toxic for the workers and consumers this is because it contains sulphur cross-links which can form sulphur dioxide. Vulcanization must be under controlled condition to avoid creating a massive amount of cross-linking, this means that it will avoid making the rubber less elastic and more brittle. Another disadvantage of vulcanized rubber, is that when you heat the rubber it melts and then cools quickly, this is quite dangerous for the people who are handling it. Another disadvantage of using vulcanized rubber, is natural rubber are becoming more scarce, therefore the cost of making the vulcanized rubber is increasing. To overcome this problem, scientist have been trying to make vulcanized rubber out of synthetic rubbers such as styrene-butadiene rubbers (SBR), however the problem with this is that it is not cost effect and it is very expensive to make.24 Applications of Natural Rubber and Vulcanized Rubber The main usage of natural rubber is in the motor industry. It is used to make tyres and tubes in vehicles this is because it decreases any generation of heat in the tyres. It also offers high mechanical resistance. Tyres and tubes are used mainly in heavy duty vehicles such as trucks and tractors. 23 Natural rubbers can be used to make toys, footwear, balloons, glue and condoms. Another important application of natural rubbers is that they can be used to make latex gloves. Latex gloves are used in many industries such as the medical industry, chemical industry, and engineering industry, this is because due to the chemical and physical properties of the natural rubber mentioned above it can protect workers and consumers hands from hazardous chemicals.25 There are several applications for the vulcanized rubber. Vulcanized rubbers are much better to produce tyres than natural rubber this is due to having high abrasion resistance meaning tyres wont wear out quickly. The rubber is flexible, this means that it can be used to make hoses, tubes, coats etc Shock absorbers in vehicles are made from vulcanized rubbers due to being able to absorb vibrations easily.26 As the rubber, does not dissolve in water, it can be used to make waterproof clothing and footwears. Another application of using vulcanized rubber is that they can be used to produce cables for telephone housing, and can be able to produce insulations and conductors for electrical instruments. The reason why they are used in electrical instruments, is that have good electrical insulating and conducting properties. Synthetic Rubbers Synthetic Rubbers are made by copolymerising two different monomers under certain conditions. There are 3 conditions (the mixture can be in) it can be done in such as: emulsion, suspension and solution. There are 9 major classes of synthetic rubbers: Styrene-butadiene rubber (SBR), Poly(Butadiene-acrylonitrile) rubbers (NBR), Butyl Rubbers (IIR), Polychloroprene (CR), Ethylene-propylene rubbers (EPDM), Urethane rubbers (EU), Silicone rubbers (VMQ), Fluoroelestomer (FKM), Flurosilicone (FVMQ).27 In this 4 major classes are being discussed. Polychloroprene In 1930, an American scientist named Wallace Carothers and his team produced a compound called chloropropene which then polymerised to form a solid which had a rubbery texture. The team had found out that the properties of this new polymer was similar to that of natural rubber. This polymer was named as Neoprene and was the first commercially successful synthetic rubber.13 Neoprene is produced by the free-radical polymerisation of chloroprene. The chloroprene undergoes polymerisation under aqueous emulsion.28 Properties of Polychloroprene The rubber has a greyish green colour.28 The rubber has a high tensile strength meaning it does not tend to break if a low amount of tensile stress is put into it. It has a high abrasion resistance meaning the rubber will not wear out quickly. It can dissolve with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a moderate elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between -34 0C to 100 0C which is better than what the given temperature range is for the natural rubber, this means under hot conditions the rubber would not lose its elasticity. The rubber has a low flammability, and has a high resistance to weather and ozone.29 Figure 5: Polychloroprene 30 Advantages of Polychloroprene This rubber is tougher than natural rubber because it has a higher tensile strength than natural rubber meaning it does not tend to break if a low amount of tensile stress is put into it. It has a very high resistance to hot conditions and other weather conditions; this means that it does not melt or break easily. Another advantage of polychloroprene rubber is that they have a better resistance to ozone and UV this means that less cracks forms than in its natural counterpart. This means that it is less likely to break than the natural rubber. It has a low flammability and can be able to self-extinguish if it is on fire. The structure of the polychloroprene can be altered to create a new compound which can exhibit different chemical and physical properties. Disadvantages of Polychloroprene The rubber has a poor resistance to aromatic compounds such as benzene derivatives, they also have poor resistance to carbonyl compounds such as ketones and esters, and, also has a poor resistance to strong oxidising agents. Another disadvantage of polychloroprene, is that they are quite expensive to produce. 29 Typical applications of Polychloroprene Production of hoses Making belts Making cable covers for electrical instruments Styrene-butadiene Rubber In the 1930s, a German chemist named Walter bock had developed a new synthetic rubber which had better properties than that of natural rubber. He first tried to copolymerise dimethyl butadiene with isoprene and butadiene, this was successful as the new polymer had similar properties to the natural rubber. He then replaced dimethyl butadiene with styrene and copolymerised with butadiene, the polymer was named as SBR (styrene-butadiene rubber).14 Styrene-butadiene Rubber is produced by the free-radical polymerisation of styrene mixed with butadiene. The monomers undergo free- radical polymerisation under aqueous emulsion. The monomers can also undergo polymerisation in the form of solution.31 Properties of Styrene-butadiene Rubber The rubber has a brown -black colour. 31 The rubber has a high tensile strength meaning it does not tend to break if a low amount of tensile stress is put into it. It has a high abrasion resistance meaning the rubber will not wear out quickly. It can dissolve with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is soluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a moderate elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between -45 0C to 100 0C which is better than what the given temperature range is for the Polychloroprene, this means under hot conditions the rubber would not lose its elasticity. 29 Figure 6: Styrene-butadiene rubber 32 Advantages of Styrene-butadiene Rubber This rubber is tougher than natural rubber because it has a higher tensile strength than natural rubber meaning it does not tend to break if a low amount of tensile stress is put into it. It has a high abrasion resistance meaning the rubber will not wear out quickly. Another advantage of styrene-butadiene rubber is that it is much more cost effective than natural rubber, and the production of the rubber is much more efficient than its natural counterpart. Disadvantages of Styrene-butadiene Rubber It has a poor resistance to any organic compounds this is because It is soluble to organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). Another disadvantage of natural rubber is that it has a poor resistance to ozone meaning that when the ozone reacts with the double bonds it breaks, this causes a crack. The crack then grows steadily because of further ozone attacks so this causes the strength of the rubber to decrease massively and cause it to break. Fillers like carbon black are needed to strengthen the rubber. Typical applications of Styrene-butadiene Rubber Production of car tyres Making mats Making shoe soles Poly(Butadiene-acrylonitrile) rubbers In 1931, scientists IG Farben developed a synthetic rubber which consisted of copolymerising acrylonitrile with butadiene, the polymer was known as NBR (Nitrile-butadiene rubber), it was the later known as Buna-N for commercial purposes. 14 Styrene-butadiene Rubber is produced by the free-radical polymerisation of styrene mixed with butadiene. The monomers undergo free- radical polymerisation under aqueous emulsion.14 Properties of Poly(Butadiene-acrylonitrile) rubbers The rubber has a yellowish colour.33 It has a high abrasion resistance meaning the rubber will not wear out quickly. It is insoluble with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a good elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between -34 0C to 121 0C which is better than what the given temperature range is for the Polychloroprene, this means under hot conditions the rubber would not lose its elasticity. However, at low temperature, the rubber loses its elasticity.29 Figure 7: Poly(Butadiene-acrylonitrile)34 Advantages of Poly(Butadiene-acrylonitrile) rubbers It has a very high resistance to hot conditions and other weather conditions; this means that it does not melt or break easily. Another advantage of Poly(Butadiene-acrylonitrile) rubber is that they have a better resistance to ozone and UV this means that less cracks forms than in its natural counterpart. This means that it is less likely to break than the natural rubber. It has a high abrasion resistance meaning the rubber will not wear out quickly. Another advantage of Poly(Butadiene-acrylonitrile) rubber is that it has a high resistance in oil this is because It is insoluble with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). 29 Disadvantages of Poly(Butadiene-acrylonitrile) rubbers At low temperature, the rubber loses its elasticity. Another disadvantage of Poly(Butadiene-acrylonitrile) rubbers, is that they have poor resistance to carbonyl compounds such as ketones and esters, and, also has a poor resistance to strong oxidising agents. 29 Typical applications of Poly(Butadiene-acrylonitrile) rubbers Making nitrile gloves Can be used for O-rings Can be used to make hoses and tubing Ethylene propylene Terpolymer Rubber In the 1960s, EPDM (which is known as Ethylene propylene Terpolymer Rubber) was produced. The rubber is made by copolymerising by a diene derivative, ethylene and propylene. The rubber has many advantageous properties over the synthetic rubbers, one of them is that they have good electrical insulating properties. EPDM rubber are now found in our everyday life such as hose, solar panels, electrical insulation etc. 16 Ethylene propylene Terpolymer Rubber is produced by the copolymerisation of ethylene, propylene and a diene derivative. The monomers under copolymerisation in the form of solution. Figure 8: EPDM 35 Properties of Ethylene propylene Terpolymer Rubber The rubber has a yellowish colour. It has a high abrasion resistance meaning the rubber will not wear out quickly. It is insoluble with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar). It is insoluble to hydrophilic solvents such as water, acetone, and alcohol. The rubber has a good elastic property, this means that when the rubber is stretched out it gets bigger, but when it is released the rubber goes back into its original shape. The rubber can only be elastic between -40 0C to 149 0C which is better than what the given temperature range is for the Poly(Butadiene-acrylonitrile) rubber, this means under hot conditions the rubber would not lose its elasticity. 29 Advantages of Ethylene propylene Terpolymer Rubber It has a very high resistance to hot conditions and other weather conditions; this means that it does not melt or break easily so does not age very easily. Another advantage of Ethylene propylene Terpolymer rubber is that they have a better resistance to ozone and UV this means that less cracks forms than in its natural counterpart. This means that it is less likely to break than the natural rubber. It has a high abrasion resistance meaning the rubber will not wear out quickly. The rubber is very cost effective, so it is cheaper to make than the other rubber compounds. 29 Disadvantages of Ethylene propylene Terpolymer Rubber It has a poor resistance to oils, this is because It is insoluble with organic solvents such as turpentine (which is an oiled that is attained by the distillation of resin from pine trees), ether, petrol, carbon tetrachloride, and naphtha (which is an oil attained by the distillation of coal tar).29 Typical applications

Friday, October 25, 2019

Myths of Cultures and Civilizations Essay -- Civilization, Myths, Lege

From before the dawn of civilization as we know it, humanity has formed myths and legends to explain the natural world around them. Whether it is of Zeus and Hera or Izanami-no-Mikoto and Izanagi-no-mikoto, every civilization and culture upon this world has its own mythos. However, the age of myth is waning as it is overshadowed in this modern era by fundamental religion and empirical science. The word myth has come to connote blatant falsehood; however, it was not always so. Our myths have reflected both the society and values of the culture they are from. We have also reflected our inner psyche, conscious and unconscious, unto the fabric of our myths. This reflection allows us to understand ourselves and other cultures better. Throughout the eons of humanity’s existence, the myths explain natural phenomena and the cultural legends of the epic hero have reflected the foundations and the inner turmoil of the human psyche. Over the recent centuries, the definition of myth has decayed into a word synonymous with falsehoods and lies. This idea of myths being completely false and therefore useless is a fairly modern one. To combat the rise of empirical science in the 1900s, theologians brought the idea of wholly literal, fundamental religion into being to combat ideas that did not perfectly align with the tenants of the religion (May 24). This was the final death blow to the idea of the metaphysical myth that was already wounded from thousands of years of being denounced as pagan or barbaric. The rise of empirical science also lent to the decay of the meaning of myth. Science was able to explain the natural world far better than a myth ever could; however, it lacked the metaphysical aspect. Due to these rising ideologies, myths hav... ...ng, Ph.D.. n.p. 2002. Web. 25 Mar. 2013. Drysdale, Jilian Miller. â€Å"Faces of the Goddess.† Synchronicity. Dec. 1999/Jan. 2000: 29-31. Sirs Renaissance. Web. 29 Mar. 2014. Freud, Sigmund. The Future of an Illusion. New York: Norton & Company Inc., 1961. Print. Henderson, Joseph. â€Å"Ancient Myths and Modern Men.† Man and his Symbols. Ed. Carl Jung. New York: Doubleday & Company Inc., 1964. 104-158. Print. Jung, Carl. â€Å"Approaching the Unconscious.† Man and his Symbols. Ed. Carl Jung. New York: Doubleday & Company Inc., 1964. 1-104. Kromholz, Susan Foster, and P. Kyle McCarter. â€Å"Why Myth Endures.† Johns Hopkins Magazine. Aug 1990: 32-37. Sirs Issues Researcher. Web, 07 Apr. 2104. May, Rollo. The Cry for Myth. New York: Norton & Company, 1991. Print. Sels, Nadia. Myth, Mind, and Metaphor: On the Relation of Mythology and Psychoanalysis. n.p. 2011. Web. 25 Mar 2014.